24/7 EmergencySandton · Midrand
    Kempton Park · Within days — hidden leaks compound

    Leak detection in Kempton Park

    Owner-run plumbing work across Kempton Park for over 16 years — The 1970s and 1980s freehold suburbs near OR Tambo and the guesthouses converted from them.

    Leak detection in Kempton Park — what we actually find

    Kempton Park's galvanised supply pipe fails from the inside, so the loss starts as a weep behind plaster and the first sign is gradual pressure loss rather than damp. We compare flow across the installation to narrow the run before testing it. On guesthouse properties, consumption patterns swing with occupancy, so we establish a real baseline before treating a high reading as a leak.

    Property stock in Kempton Park

    Kempton Park's 1970s and 1980s freehold homes are at the age where original galvanised supply pipe fails from the inside out, so pressure drops gradually rather than bursting and owners tend to blame the geyser. Proximity to OR Tambo means many properties run guesthouse or short-let operations from converted homes, which carries different compliance requirements from a domestic installation.

    Direct access. On guesthouse and short-let properties we schedule around occupancy and assess against the compliance standard that fits the actual use.

    Faults that cluster in Kempton Park

    • Galvanised supply pipe failing from the inside out, read as a weak geyser
    • Guesthouse and short-let use assessed against domestic rather than the correct standard
    • Full boards with no spare way for the dedicated circuits a COC now requires
    • Flow restriction between geyser outlet and tap rather than a cylinder fault

    How leak detection works

    The meter test tells you whether you have a leak; detection tells you where it is. Close every tap, note the reading, wait two hours and read again — any movement means water is escaping between the meter and your fixtures. From there, acoustic correlation and thermal imaging locate it precisely enough to repair without opening tiles speculatively. That precision is the whole point, because the repair is usually small and the exploratory damage is what costs.

    • Acoustic and thermal detection on supply lines, including under slabs and paving
    • Toilet and cistern dye testing, which finds the most commonly missed silent leak
    • Irrigation, pool and buried supply-line isolation testing
    • Written reports with marked locations for insurance and municipal leak adjustments
    • Repair of the located leak, or re-routing where the buried run is at end of life

    Our process on a Kempton Park call-out

    1. 1Confirm an active leak with a meter isolation test before any equipment comes out
    2. 2Isolate zone by zone — toilets, irrigation, pool, house — to narrow the area
    3. 3Pinpoint with acoustic correlation and thermal imaging
    4. 4Mark the location and report it in writing with the position recorded
    5. 5Repair with a targeted break-out rather than exploratory demolition

    Leak detection in Kempton Park — frequently asked questions

    For the full detail on this service, see our Leak detection page. For everything else we do in the area, see plumbers in Kempton Park.

    Need leak detection in Kempton Park?

    Owner-managed by Garth Blair. We pick up the phone and book you in personally.

    Get in touch

    Speak to Garth directly.

    Owner-managed means you reach the person who's accountable. Phone, email or WhatsApp — whatever's easiest for you.

    Request a Free Quote

    We'll get back to you within one business day.

    This opens your own email app with the details filled in — press send there to reach us.

    Or call directly: 082 886 9119